MIXRELEASE MRA, Formwork Release Agent
ReleasePro Formwork Release Agent is a specifically designed combination of low viscosity hydro carbon carrier mineral oils, chemicals, and a chemically active release agent that facilitates the effortless release of form work and gives concrete a high-quality finish.
For a clean release, it works well on shutter faces and molds before concrete is cast. following the formwork's removal. There are fewer blow holes and a smooth, consistent finish to the applied concrete surface.
Mixrelease. ReleasePro Formwork Release Agent reacts with cement to give treated surfaces superior release qualities.
#FormworkReleaseAgentforConcrete
#FormworkReleaseAgentforConcreteManufacturerUAE
#FormworkReleaseAgentforConcreteOMAN
#FormworkReleaseAgentforConcreteINDIA
Advantages of using RXSOL ReleasePro Formwork Release Agent
- Works well with all cement variety
- Very economical as it reduces labor
- Reduces chances of damage to formwork
- Fit for plastic-faced molds and formwork made of steel, wood, and plastic
- Contains specially formulated corrosion and rust inhibitors
| Physical state | Liquid |
| Colour | Colorless, to, yellow |
| Odor | Stinging, hydrocarbon-like |
| Melting point/freezing point | Melting point/range: < -20 °C - ASTM D 97-66 - (External MSDS) |
| Initial boiling point and boiling range | 150 - 200 °C |
When using a new mold, ReleasePro Formwork Release Agent can be applied directly to the mold; however, when using an old mold, any adhering material residue needs to be removed using the appropriate techniques before using the mold. Applied with a roller, brush, or spray.
Unsealed timber surfaces should be recoated if a delay in using the mould causes the release agent to seep into the timber. Non-absorbent surfaces only need to be applied once.
Although the dosage or covered area is according to the mould surface, on an average ReleasePro Formwork Release Agent convers 50-70 meter sq per ltr
